HP 8710p - Compaq Business Notebook Maintenance And Service Manual page 84

4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Switch cover (see
c. Fan/heat sink assembly (see
d. Processor heat sink (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE:
the processor socket when you install the processor.
Reverse this procedure to install the processor.
76 Chapter 4 Removal and replacement procedures
Battery on page
Keyboard on page
Switch cover on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle (4) embossed on
44).
60)
67)
Fan/heat sink assembly on page
74)
70)