Component Replacement Procedures; Serial Number; Computer Feet - HP 8710p - Compaq Business Notebook Maintenance And Service Manual

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 97 screws and screw locks, in 18 different sizes, that must be removed, replaced,
or loosened when servicing the computer. Make special note of each screw and screw lock size and
location during removal and replacement.

Serial number

Report the computer serial number to HP when requesting information or ordering spare parts. The
serial number is located on the bottom of the computer.

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare
part number 450590-001. There are 9 rubber feet, in 4 different sizes, that attach to the base enclosure
in the locations illustrated below.
Component replacement procedures 43