Bluetooth Module - HP 8710p - Compaq Business Notebook Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module (includes Bluetooth module cable)
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
Remove the Bluetooth® module:
1. Position the computer with the rear panel toward you.
2. Release the Bluetooth module (1) from the clip in the hard drive bay by sliding it forward.
3. Remove the Bluetooth module (2) from the hard drive bay by lifting it straight up.
4. Disconnect the Bluetooth module cable (3) from the Bluetooth module.
Reverse this procedure to reassemble and install the Bluetooth module.
Battery on page 44).
Hard drive on page 48).
Component replacement procedures
Spare part number
450485-001
51