Starter Rope/Recoil Starter; Primer; Curb Height Adjustment Lever; Blade Control Bail - Craftsman 247.772460 Operator's Manual

f
BladeControl
Bail
Blade DepthControlLever
RecoilStarter
Curb Height
AdjustmentLever
BevelAdjl
Lever
\
Edgercontrolsand featuresare describedbelowand illustratedin
Figure6.
Be familiarwith all the controlsand their properoperation.Knowhow
to stopthe machineand disengageit quickly.
Figure6
depressedagainstthe upper handlein order to operatethe edger.
Releasing the blade controlstopsthe engineand theedger blade.
BLADE DEPTH CONTROL LEVER
The bladedepthcontrol leveris locatedon the rightside of the upper
handle.It is usedto controlthe depthof the cut.The furtherforward
STARTER ROPE / RECOIL STARTER
Thestarter rope/recoilstarteris usedto start the engine.
PRIMER
the blade depthcontrolleveris moved,the deeperintothe soil the
edger bladewill cut.
BEVEL ADJUSTMENT LEVER
The beveladjustmentleveris locatedon the front,left portionof the
Theprimeris usedto pumpgas into thecarburetorand aid in starting
the engine.Use it to start a coldengine,butdo not useit to restarta
warmengineafter a short shutdown.
CURB HEIGHT ADJUSTMENT LEVER
Thecurb heightadjustmentleveris foundon the rearportionof the
edger.Whenplacedin an applicablenotch,it aidsin stabilizingthe
edgerwhileedging grassalong a curb.
BLADE CONTROL BAIL
Locatedon the upperhandle,the blade controllevermustbe
edger,behindthe edgerblade.It is usedto vary the angleof the edger
bladebetweenone of three positionsforedging/trenchingor beveled
edging.
11