Manual Operation; How The Air Conditioner Works - York MLCA-MLHA-07-24 Installation & Owner's Manual

MANUAL OPERATION

Manual operation can be used temporarily in case you can not find the remote controller or its batteries are exhausted.
Panel
Manual control button

HOW THE AIR CONDITIONER WORKS

Press Sleep button
1
Set
Temperature
1 hour
Cooling
Press Sleep button
Set
Temperature
1 hour
Heating
Cooling Fan only
Room
temperature
set temperature
DRYING operation
J199.pmd
1 Open and lift the front panel up to an angle at which it remains
fixed with a clicking sound.
2 Press the button until the AUTO indicator is lit, the unit will work in
forced AUTO mode.
3 Close the panel firmly to its original position.
CAUTIONS
• Once you push the manual button, the operation mode is shifted in
an order as: AUTO, COOL, OFF.
• Push the button twice, the unit will operate in forced COOL mode.
This is used for testing purposes only .
• Third press will stop the operation and turn off the air conditioner operation.
• To restore the remote controller operation, use the remote controller
directly.
AUTO / COOL
I AUTOMATIC OPERATION
• When you set the air conditioner in AUTO mode, it will automatically
select cooling, heating (cooling/heating models only), or fan only
1
operation depending on what temperature you have selected and
the room temperature.
• The air conditioner will control room temperature automatically
1 hour
around the temperature point set by you.
• If the AUTO mode is uncomfortable, you can select desired conditions
manually.
I SLEEP OPERATION
• When you push SLEEP button during cooling, heating (cooling only
type without), or AUTO operation, the air conditioner will automatically
1
increase (cooling) or decrease (heating) 1°C per hour. The set
temperature will be steady 2 hours later.
1
• The fan speed will be automatically controlled.
I DRYING OPERATION
1 hour
• The dry mode will automatically select the drying operation based
on the difference between the set temperature and the actual
room temperature.
• The temperature is regulated while dehumidifying by repeating turning
on and off of the cooling operation or fan only. The fan is low.
Cooling Fan only Cooling
Time
5
ENGLISH
31/03/2005, 9:53 PM
EN
5