Removing The Memory Module - Zotac ZBOX miniHTPC User Manual

2. Gently press down on the memory module until it locks into place by the arms of the
memory slot.
Note:This ZOTAC ZBOX accomodates two DDR2 SO-DIMM memory modules. You must install at least
one module in one of the two slots.

Removing the memory module

1. Remove the cover of your ZOTAC ZBOX.
2. Gently press the two arms securing the memory in the socket as shown in the image
below to release the memory module.
3. The memory module can be easily taken out.
ZOTAC ZBOX
9