,Find Information; Maintenance - Craftsman Speed Start 316.859530 Operator's Manual

NOTE: This a ccessory istobeused o nelectric start capable units o nly.
Refer tothe
Starting Instructions section of the unit's Operator's Manual
for proper starting instructions when using this accessory.
NOTE: This accessory is FOR INTERMIqKENT USE ONLY; use only as
directed below.
OPERATING THE ELECTRIC STARTER
WARNING:
To avoid serious personal injury and unit damage, do
not use the plug-in power start in damp or wet locations, in rain or
snow.
WARNING:
Inspect the unit prior to use. DO NOT use the unit if any part is damaged in any way. A damaged unit may cause
serious personal injury due to electrical shock.
1. Place the electric starter keyed tip into the Speed Start
TM
port, making sure
the engine tabs are flush with the indents on the electric starter. (Fig. 2)
NOTE: It may be necessary to slightly twist the electric starter until the key
fits securely into the Speed Start
TM
port.
2. With the electric starter flush with the engine, squeeze the trigger in
intervals of no more than 4 seconds
each until the unit starts. (Fig. 3) Speed Start
TM
port tt_'Y_ /_'::
NOTE: The electric starter is designed to be Indents
used intermittently. Squeeze the trigger ,--
for no longer than 4 seconds at a time _._ _I_}_
with a 120 second cooling period in X_a;_ _
b etweeneachstartingattempt __f_. Ta "
3. Once the engine has started,
remove
Engi_e
the electric starter from the Speed
Start
TM
port. The unit is ready for use. Fig. 2
If... the electric starter does not turn on or
suddenly stops while in use, wait at
least 5 seconds to allow the unit to cool.
iMPORTANT! The battery is equipped with
an internal circuit breaker that will shut
off power to the electric starter if the
battery becomes overloaded in the
course of use. Once cooled, the battery Trigger
will reset itself. Follow these steps if an
overload occurs: Fig. 3
1. Release the trigger
2. Squeeze the trigger to resume the starting process.
NOTE: The battery may need to cool for approximately 1 minute
NOTE: Do not attempt to repair; there are no user serviceable parts inside.
CLEANING
Use a small brush to clean off the outside of the unit and keyed tip. Do not
use strong detergents. Household cleaners that contain aromatic oils such
as pine and lemon, and solvents such as kerosene, can damage plastic
housing or handle. Wipe off any moisture with a soft cloth.
STORAGE
• Check unit before storage to be sure the equipment is in safe working
condition.
Stop the motor.
Store the unit indoors, in a dry and locked place, out of the reach of children.
Maintain or replace safety and instruction labels, as necessary.
Motor Type ............................... Cordless, Battery-powered
Motor Voltage .......................................... 12 V max.
Unit Weight ..................................... 1.66 Ibs. (0.75 kg)
Charge Time ........................................... 3-5 Hours
Optimum Charging Temperature .............. 32 ° to 104 ° F (0 ° to 40 ° C)
Battery Charger Input ........................... 120 V 60 Hz AC only
Battery Charger Output Maximum .............................. 12 V
Battery Charger Weight ............................. 0.6 Ibs. (0.27 kg)
* All specifications are based on the latest product information available at
the time of printing. We reserve the right to make changes at any time
without notice.
HELP?
"_"_ N,,I//.,@+%_:;_aY}SW@_I' aY}@ KI,Oiif({_!
_ Find this and all your other product manuals online.
_ Get answers from our team of home experts.
_;_ G et a personalized maintenance plan for your home.
_,Find information and tools to help with home projects.
B:;/'e'_;_.g_ ; so '!/e'_;_ ]:;_'s,,s Se _'£s .............