f) Keep c utting t ools sharp a nd clean. Properly
with sharp cutting edges are less l ikely tobind and are easier tocontrol.
g)Use thepower tool, a ccessories
and tool b its etc. i naccordance
i nstructions, taking
into account the working
the work to be performed.
Use of the power tool for operations
from those intended could result in a hazardous situation.
tool use and care:
only with the charger
by the manufacturer.
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically
of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connection
from one terminal
to another. Shorting the
battery terminals together may cause burns or a fire.
d) Under abusive
liquid may be ejected
from the battery;
flush with water, if
help. Liquid ejected
from the battery may cause irritation or burns.
a) Have your power tool serviced
by a qualified
repair person using only
parts. This will ensure that the safety of the power
tool is maintained.
OTHER SAFETY PRECAUTIONS
When using electric tools, basic safety precautions
should always be used to reduce the risk of fire, electric shock
and personal injury. Only use UL listed extension cords suitable for I
outdoor use, such as Type SW-A, STW-A. STOW-A, SJW-A,
SJOW-A, SJTW-A, or SJTOW-A.
+ Extension Cords: Make sure the extension cord is in good condition, is
heavy enough to carry the current that the unit will draw. If in doubt, use
the next heavier gauge cord. An undersized
extension cord will cause a
drop in line voltage resulting in a loss of power and overheating.
shown illustrates the correct size to use depending
on the cord length and
nameplate amperage rating.
WIRE SIZE FOR EXTENSION
CORDS FOR 120 VOLT
USING 6-10 AMPS
I£o dLe gth tt.!
1 2+ !
+ If the extension cord is damaged
in any manner while plugged in,
the extension cord from both the house and the unit. Do not
re-use until the extension cord has been repaired or replaced.
+ Ground Fault Circuit Interrupter (GFCI) protection should be provided on the
circuit(s) or outlet(s) to be used for this unit. Receptacles are available having
built-in GFCI protection and may be used for an added measure of safety.
+ Wear safety glasses or goggles with side shields that are marked as
meeting ANSI Z87.1-1989 standards, and ear/hearing
operating this unit. Wear a face or dust mask if the operation is dusty.
+ Keep cutting tools sharp and clean. Properly maintain cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
+ Allow the unit to cool before storing or transporting.
Be sure to secure the
unit while transporting.
+ Never douse or squirt the unit with water or any other liquid. Keep handles
dry, clean and free from debris. Clean after each use.
+ Keep these instructions.
Refer to them often and use them to instruct other
users. If loaning someone this unit, also loan them these instructions.
SAVE THESE INSTRUCTIONS
FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship.
Defective product will be replaced free of charge.
details to obtain free replacement,
visit the web site: www.craftsman.com
This warranty is void if this product is ever used while providing
commercial services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Sears Brands Management
Hoffman Estates, IL 60179