Advertisement
READ ALL INSTRUCTIONS
a
READ THESE INSTRUCTIONS
AND INSTRUC-
TIONS
FOR YOUR TABLE SAW THOROUGHLY
BEFORE
USING ACCESSORY.
•
KNOW YOUR POWER TOOL. Read the owner's
manual for your Table Saw carefully. Learn the
saw's applications and limitations as well as the
specific potential hazards related to this tool.
•
KEEP THE WORK AREA CLEAN. Cluttered work
areas and work benches invite accidents. DO NOT
leave tools or pieces of wood on the saw while it is
in operation.
a ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses have only impact-resistant lenses; they
are NOT safety glasses.
a ALWAYS DISCONNECT SAW FROM POWER
SUPPLY BEFORE MAKING ADJUSTMENTS OR
ADDING ACCESSORIES. Make sure the switch is
off when reconnectingto power supply.
a SAVE THESE INSTRUCTIONS. Refer to them
frequently and use to instructother users. If you
loan someone this accessory, loan them these
instructions also.
Look for this symbol
to point
out important
safety
precautions.
It
means
attention!!!
Your
safety
is involved.
Read these instructions completely before assembling
or using the long miter/rip fence kit.
This new long miter/rip fence kit has been designed
for use with Craftsman 10 in. table saws _922811and
_922185.The kit has been engineered and manufac-
tured to Sears high standards for dependability, ease
of operation, and operator safety. This kit provides
additional support and control for making safe and
accurate miter cuts on tong pieces of work. It also
provides additional support and control for making
safe and accurate rip cuts in long pieces of work.
Properly cared for, it will provide years of dependable,
trouble-free performance.
_k
WARNING:
Before attempting to use this
accessory, familiarize yourself with all operating
features and safety requirements for the
accessory and the table saw.
LONG MITER/RIP FENCE KIT SHOWNATTACHEDTO CRAFTSMAN 10 in. TABLE SAW
LONGRIPFENCE
LONG
MITER FENCE
TABLESAWIS NOTINCLUDED
WITHTHISKIT
WARNING:
The operation of any tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage, Before beginning tool operation, always wear safety goggles or
safety glasses with side shields and a full face shield when needed. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields, available at
Sears Retail Stores.
2
Advertisement
