Table of Contents
Advertisement
GENERAL
SAFETY iNSTRUCTiONS
BEFORE USING THiS POWER TOOL
Safety is a combination of common
sense, staying alert and knowing how
to use your power tool.
,A WARNING
I
To avoid mistakes
that could cause
serious injury, do not plug the tool in
until you have read and understood
the following.
.
READ and become
familiar with the entire
Operator's Manual. LEARN
the tool's application, limitations and
possible hazards.
2. KEEP GUARDS iN PLACE and in
working order.
3. REMOVE ADJUSTING
KEYS
AND WRENCHES. Form the habit
of checking to see that keys and
adjusting wrenches are removed
from the tool before turning ON.
4. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite
accidents.
6. KEEP CHILDREN AWAY. All
visitors and bystanders should be
kept a safe distance from work area.
7. MAKE WORKSHOP
CHILD PROOF
with padlocks, master switches or by
removing starter keys.
8. DO NOT FORCE THE TOOL. It will
do the job better and safer at the
rate for which it was designed.
9. USE THE RIGHT TOOL. Do not
force the tool or an attachment to do
a job for which it was not designed.
10.USE PROPER EXTENSION
CORDS. Make sure your extension
cord is in good condition. When
using an extension cord, be sure
to use one heavy enough to carry
the current your product will draw.
An undersized cord will result in
a drop in line voltage and in loss
of power which will cause the tool
to overheat. The table on page
12 shows the correct size to use
depending on cord length and
nameplate ampere rating. If in
doubt, use the next heavier gauge.
The smaller the gauge number, the
heavier the cord.
5. DO NOT USE iN DANGEROUS
ENVIRONMENTS.
Do not use
power tools in damp locations, or
expose them to rain or snow. Keep
work area well lit.
11 .WEAR PROPER APPAREL.
Do not wear loose clothing, gloves,
neckties, rings, bracelets or other
jewelry which may get caught in
moving parts. Nonslip footwear is
recommended. Wear protective hair
covering to contain long hair.
5
_,
Hide quick links:
Advertisement
Table of Contents
