Operation; Shoulder Strap Adjustment; Know Your Blower; Throttle Lever - Craftsman 358.794550 Instruction Manual

SHOULDER STRAP ADJUSTMENT
(for vacuum u_e only)
1. HoId the unit as shown.
2. Pass the shoulder strap over your
head and onto your right shoulder.
3. Extend your left arm toward the
rear of the vacuum bag.
4. Adjust shoulder strap until the vac-
uum bag/shoulder strap seam lies
between your thumb and index
finger.
5. Make sure air flows freely from the
elbow tube into bag. tf bag is kinked,
the unit wilt not operate properly.
KNOW YOUR SLOWER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
Upper
Lower Vacuum Tube
Primer Button
Choke Lever
Elbow Tube
\
Blower
Tube
\
Fuel Mix
Throttle
Lever_
Starter
Rope
Rear
HandIe
THROTTLE LEVER
The THROqqLE LEVER is used to select
the desired engine speed and to stop the
engine. Move the throttle lever to the
position for full speed operation.
Move the throttle lever to the _ posi-
tion for idle speed. To stop the engine,
move the throttle lever to the STOP posi-
tion.
PRIMER BUTTON
The PRIMER BLrTTON removes air from
the carburetor and fuel tines and f_tls
them with fuel. This allows you to start
the engine with fewer pulls on the starter
rope. Activate primer button by pressing
it and allowing it to return to its original
position.
CHOKE LEVER
The CHOKE helps to supply fuel to the
engine to aid in cold starting, Activate
the choke by moving the choke lever to
the FULL CHOKE position. After engine
attempts to start, move the choke lever
to the HALF CHOKE position, Once en-
gine starts, move choke lever to the
RUN position.
-6-