Controlling Audio And Video; Switching Between Picture Sources; Freezing The Picture - Epson PowerLite 51c User Manual

Controlling Audio and Video

While giving your presentation, you may want to switch between
picture sources, temporarily turn off or freeze the picture, or adjust the
volume.
Make sure you've first set up your projector and connected your audio
or video source as described in Chapter 1.

Switching Between Picture Sources

You can connect the projector simultaneously to one computer source
and one video source. Then you can use the buttons on the projector
or remote control to switch between them.
I Press the button on the projector to switch between
Source
computer, S-video, and composite video sources.
Press the
I
Computer
control to select the source you want to use.
After you select a source, the screen goes dark for a moment before the
image appears.

Freezing the Picture

You can use the remote control to freeze the current picture on the
screen.
Press the button to freeze the current image on the screen.
I
Freeze
The sound will continue.
I Press the button again to re-start it.
Freeze
, , or button on the remote
Video S-Video
Select
Computer,
Video, or
S-Video
Using the Projector
35