What To Do If You See A Blank Screen - Epson PowerLite 51c User Manual

What To Do If You See a Blank Screen

If you see a blank screen or a blue screen with the message
after turning on your computer or video source, do one of the
following:
Make sure the cables are connected correctly, as described in
I
Chapter 1.
Make sure the
I Power
lens cap is off.
I If you've connected more than one input source, you may need to
press the button on top of the projector or the
Source
,
Computer Video
select the source you want to use. (Allow a few seconds for the
projector to sync up after pressing the button.)
Source button
Try restarting your computer.
I
I If you still don't see an image and you're using a PowerBook, see
page 26 or 27 for additional steps. If you're using a PC laptop,
see page 28.
light is green and not flashing and the
, or button on the remote control to
S-Video
No Signal
Computer,
Video, and
S-Video
buttons
Using the Projector
25