note
You can't use the projector
with a cable TV-style
F connector.
Setting Up the Projector
18
If you don't need to make any other connections, you can plug in and
turn on your equipment; see page 23 for instructions.
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
You can connect one video source and a computer at the same time,
and easily switch between them. The projector supports HDTV,
NTSC, PAL, and SECAM formats, and automatically detects the one
you're using.
Connecting the RCA A/V Video Cable
Before you start, make sure the projector and your VCR or other
video source are turned off.
1. Connect the yellow plug on one end of the A/V cable to the
projector's yellow
Video
2. Connect the other yellow plug to the video-out jack on your video
source.
3. Connect the red and white plugs on the A/V cable to the
projector's
Audio L
RCA
audio/video cable
4. Connect the red and white plugs at the other end of the cable to
the corresponding audio output jacks on your video source.
jack.
(white) and
(red) jacks.
R