Adjusting The Image Shape - Epson PowerLite 51c User Manual

3. Once the image is positioned where you want it, release the levers
to lock the feet into position.
4. To fine-tune the height, rotate the feet clockwise to raise the
projector and counterclockwise to lower it.
clockwise
to raise it

Adjusting the Image Shape

If the projected image isn't square or has a "keystone" shape, do one or
more of the following:
If your image looks like
I
projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
I If your image looks like
the button to correct the shape of the image. The
Keystone
button corrects up to a 15° tilt. After correction, your
Keystone
image will be slightly smaller.
You can also perform electronic keystone correction using the
projector's Setting menu. See page 44 for instructions.
counterclockwise
to lower it
or , you've placed the
or , press the
Keystone button
note
If the image shape is not
square after adjusting its
position, see the next section
for a solution.
or side of
+ —
note
If the image is noticeably
uneven after keystone
correction, reduce the
Sharpness setting using the
Video menu; see page 41 for
instructions.
Using the Projector
31