Appendix A About The Epson Projector Usb-Com Driver; Operating Environment - Epson EMP Link 21L User Manual

Appendix A About the EPSON Projector USB-COM Driver

If you use a USB cable to connect the projector to a Windows PC, you need to install the EPSON
Projector USB-COM Driver on the PC before using EMP Link 21L.
For Macintosh, when you install EMP Link 21L, the EPSON Projector USB-COM Driver is also
installed automatically. Therefore, no further installation procedure is required.
A.1 Operating environment
The EPSON Projector USB-COM Driver runs in the following environments.
For Windows
OS
CPU
Memory
Hard Disk Drive
Port
Note: EPSON Projector USB-COM Driver also operates on Windows XP. When installing this driver on
Windows XP, please ignore any warning messages and continue installation.
For Macintosh
OS
CPU
Memory
Hard Disk Drive
USB Interface
Remarks
Appendix A About the EPSON Projector USB-COM Driver
Windows 98/98 Second Edition/Me/2000
Intel Pentium 166 MHz or above
32 MB or more of available memory
5 MB or more of available space
USB port available on PC
MacOS 8.6 - 9.2/X 10.1 (Classic)
Power PC or above
32 MB or more of available memory
(MacOS X: 128 MB or more of available memory)
5 MB or more of available space
USB Manager 1.2 or later
This driver uses SerialShimLib supplied with the OS. It does not run
properly if SerialShimLib is not present in the [Extensions] folder.
EPSON EMP Link 21L User's Guide 18