To use a memory setting you've saved on the projector:
Access the projector's memory settings either from the remote control (see page 33) or by
using Cinema Color Editor as follows:
1. Select
Picture Quality
1. Select
Picture Quality
2. Click Memory
management
2. Click the tab where the setting you want to use is stored (
1. Select Standard
or Advance
2. Select the setting
you want to use
3. Click Select
3. Select the desired memory setting, then click
on the screen using the selected setting.
, then click
Memory management
and choose
Standard
. After a moment, your image appears
Select
.
Select
3. Click
Select
or
).
Advance
47