Craftsman 875.199800 Owner's Manual page 2

Owner's Manual Model No. 875.199800 Owner's Manual Model No. 875.199800
_, Features & Benefits
_, Specifications
_, Product Warranty
_, Compressor Requirements
Important Safety Instructions
_, Installation and Operation
_, Maintenance
_, Exploded View Drawing & Parts List
_, Troubleshooting
The Craftsman Model 875.199800 3/8"
Square Drive Butterfly Impact Wrench is
ideal for general assembly, automotive,
agricultural and industrial applications.
Features a built-in regulator for power
output adjustment; jumbo hammer clutch
for increased power output; and a ring-
type socket retainer allows quick socket
changes.
ONE YEAR FULL WARRANTY ON
CRAFTSMAN TOOL
If this Craftsman tool fails to give complete
satisfaction within one year from the date
of purchase, RETURN IT TO ANY SEARS
STORE OR OTHER CRAFTSMAN
OUTLET IN THE UNITED STATES FOR
FREE REPLACEMENT.
If this Craftsman tool is ever used for
commercial or rental purposes, this
warranty applies for only 90 days from the
date of purchase. This warranty does not
include expendable parts, such as lamps,
batteries, bits or blades. This warranty
gives you specific legal rights, and you
may also have other rights which vary
from state to state.
Sears, Roebuck and Co.,
Hoffrnan Estates, IL60179
Drive size ........................................... 3/8"
Impacts per minute ..................... 850 IPM
Free speed (No Load) ......... 10,000 RPM
Ultimate torque .......................... 95 ft. Ibs.
Weight .............................................. 2 Ibs.
Overall length .................................. 7.25"
Average air consumption ........ 3.6 SCFM
Recommended hose size .......... 3/8" I.D.
Air inlet ....................................... 1/4" NPT
Maximum Air Pressure .................. 90 PSI
Light Use - 12 Gallon
Typical Use - 17 Gallon
Heavy Use - 33 Gallon Professional
Read Operating Instructions
Please become familiar with all the
instructions and warnings before
operating any pneumatic tool.
Always Wear Approved Eye Protection
Impact resistant eye protection should
meet or exceed the standards set forth in
ANSI Z87.1, Occupational and
Educational Eye and Face Protection.
Look for marking Z87.1 on your eye
protection to ensure that it is an approved
style.
Hearing Protection is Recommended
Hearing protection should be used when
the noise level exposure equals or
exceeds an 8 hour time-weighted average
sound level of 85dBA. Process noise,
reflective surfaces, other tools being
operated nearby, all add to the noise level
in a given work area. If you are unable to
determine your noise level exposure, we
recommend the use of hearing protection.
Avoid Prolonged Exposure to Vibration
Pneumatic tools can vibrate during use.
Prolonged exposure to vibration or very
repetitive hand and arm movements can
cause injury. Discontinue the use of any
tool if you experience tingling, numbness,
discomfort or pain in your hands or arms.
You should consult your physician before
resuming use of tool.
90 PSI Maximum
This tool is designed to operate at an air
pressure of 90 pounds per square inch
gauge pressure (90 PSI) maximum, at the
tool. Use of higher air pressure can, and
may cause injury. Also, the use of higher
air pressure places the internal
components under loads and stresses
they were not designed for, causing
premature tool failure.
California Prop 65
Some dust created by power sanding,
sawing, grinding, drifting and other
construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead based paint, crystalline
silica from bricks and cement and other
masonry products, arsenic and
chromium from chemicafty-treated
lumber.
Your risk from those exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well
ventilated area, and work with approved
safety equipment, such as dust masks
that are specifically designed to filter
out microscopic particles.
ENG-2 ENG-3