Vcr And Satellite Receiver Connection - Epson Livingstation LS47P1 User Manual

Note
Before connecting a
satellite receiver to the TV,
be sure to read any
instructions that came with
the receiver.
Note
If your satellite receiver
doesn't have an S-Video
connector, you can
connect a video cable
(yellow) to the Video
connectors instead of the
S-Video cable using these
instructions.
It's best to connect your
satellite receiver to the
S-Video connectors on the
back of the TV to free up
the S-Video connector on
the front to connect a
camcorder.
26
Setting Up the TV

VCR and Satellite Receiver Connection

1 Turn off and unplug your TV, VCR, and satellite receiver.
2 Connect the VCR as described in "VCR Connection" on page 23.
3 Connect the satellite antenna cable to the Satellite In connector on your satellite
receiver.
4 Connect one end of an S-Video cable to one of the S-Video connector on your satellite
receiver.
5 Connect the other end of the S-Video cable to one of the S-Video connectors on your
VCR.
6 Connect one end of a standard, red/white audio cable to the R and L Audio Line Out
connectors on your satellite receiver.
7 Connect the other end of the audio cable to the R and L Audio Line In connectors on
your VCR.