Responding To Tv Panel Light Indicators - Epson Livingstation LS47P1 User Manual

114
Solving Problems

Responding to TV Panel Light Indicators

Lamp and Power light status
Lamp light Power light
Off Green
Off Green flashing
Off Orange flashing
Off Orange
Orange flashing Any state
Red Red
Red flashing Red
Orange Red
Lamp
Power
light
light
Status
Ready
The TV is operating normally.
Warm-up mode
After a moment, your image will appear.
Cool-down mode
Power
Wait until the light stops flashing. When it lights orange
without flashing, you can turn the TV back on or unplug it.
Standby mode
To turn the TV back on, press the
disconnect the power, you can unplug the TV.
Lamp replacement warning
The projection lamp is almost burned out. You may also see a
message on the screen.
Obtain a replacement lamp, then follow the steps on
page 101 to replace it.
Lamp error
The projection lamp has burned out or has another problem.
Obtain a replacement lamp, then follow the steps on
page 101 to replace it.
Lamp cooling or open cover error
Make sure the lamp cover is closed completely.
If the cover is closed, the lamp may not have cooled
completely before the cover was opened. Wait a few minutes
until the fan stops running, then unplug the TV, plug it back in,
Power
and press the button to turn on the TV. If the error
persists, contact EPSON as described on page 124.
High temperature warning
The TV is overheating and the lamp is turned off automatically.
Turn off the TV and let it cool for a few minutes. Make sure there
is plenty of space around the TV and that none of the
ventilation slots are obstructed. Then turn the TV back on. If it
continues to overheat, contact EPSON as described on
page 124.
Power
button. If you need to