Storage - Craftsman 358.341151 Operator's Manual

Cutters Depth Gauge
Drive Links
6. Slide t he chain b etween thehous-
ing and the sprocket, Place c hain
around the sprocket and fitthe
drive l inks i nto theguide b ar
groove and then around guide b ar
nose.
Sprocket
J _
Night Housing J
7. Hold the guide bar against the saw
frame and install the bar clamp
plate. Be sure the tab on the bar
clamp plate is toward the rear of
bar.
Adjusting Pin Slot
,-_,,z_ Tab
Sar / IU/
Clamp .J f" Bar N uts_,_"_,, _
Plate / I _------_f--_
8. Secure the guide bar and bar
clamp plate with the bar nuts; tight-
en finger tight only.
CAUTION: If saw chain is installed
backwards, the saw will vibrate exces-
sively and will not cut wood.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the
MAINTENANCE section.
CUSTOMER SERVICEABLE PARTS
_li WARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART
Bar Mounting Nuts
Oil Cap
Guide Plate
Safety Lock Button
Bar Adjusting Screw
Bar Adjusting Pin
Spacer
Spacer Screw
File (5/32" dia,) Twin Pak
File Guide (File Holder)
Depth Gauge Tool
Chain -14"
Guide Bar - 14"
Bar & Chain Lubricant -1 qt.
Bar & Chain Lubricant -1 gal.
PART NO.
530015251
530029282
530029285
530025873
530015514
530023492
530015832
530015835
71-36524
71-36565
71-36557
71-3617
71-36365
71-36556
71-36554
A
WARNING: Perform the following
steps after each use:
• Allow the motor to cool before storing
or transporting.
• Store chain saw and extension cord
in a well ventilated area
• Store chain saw with all guards in
place and position chain saw so that
any sharp object cannot accidentally
cause injury.
• Store chain saw unplugged, well out
of the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the
end of the season or if it will not be
used for 30 days or more.
If your chain saw is to be stored for a
period of time:
• Clean it thoroughly before lengthy stor-
age.
• Store in a clean dry area.
• Lightly oil external metal surfaces
and guide bar.
• Oil the chain and wrap it in heavy
paper or cloth.
• Use bar sheath to cover bar.
15