SAFETY RULES FOR BATTERY CHARGER cont.
10. Do not disassemble
Take it to a qualified
or repair is required.
Incorrect reassembly may result in a risk of
electric shock or fire.
charger from the power supply when not in use. This will reduce
the risk of electric shock or damage if metal items should fall into the opening in
the charger. It also will help prevent damage during a power surge.
12. Risk of electric
Do not touch
un-insulated portion of output connector
or un-insutated battery terminal.
13. Save these instructions.
Refer to them frequently and use them to instruct
others who may use this tool. If you loan someone this tool, also loan them these
instructions to prevent misuse of the product and possible injury.
RULES FOR SAFE OPERATION
BE SURE to read and understand
listed below may result
shock, fire \
and / or serious personal injury.
1. ALWAYS wear safety glasses or eye shields
when using this tool. Everyday
eyeglasses have only impact-resistant
lenses; they are NOT safety glasses.
2. PROTECT your lungs. Wear a face mask, dust mask or respirator if the operation is
3. PROTECT your hearing.
personal hearing protection during
use. Under some conditions noise from this product may contribute to hearing boss.
4. ALL ViSiTORS AND BYSTANDERS
MUST wear the same safety equipment that
the operator of the tool wears.
5. ALWAYS check the tool for damaged
parts. Before further use of the toot, a
guard or other part that is damaged should be carefully checked to determine if it
will operate properly and perform its intended function. Check for misalignment or
binding of moving parts, breakage of parts, and any other condition that may affect
the tool's operation. A guard or other part that is damaged should be properly
repaired or replaced at a qualified service center.
6 SAVE THESE INSTRUCTIONS.
Refer t o
use them to instruct others who may use this tool. if someone
tool, make sure they have these instructions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following
(1) this device may not cause
harmful interference, and (2) this device must accept any interference
interference that may cause undesired operation
1. The trimmer comes assembled except for the guard, edge guide wheels,
which must be attached.
2. Remove the trimmer, safety guard, edge guide wheels, box containing
the battery pack and charger from the carton and inspect your trimmer.
3. Do not discard box or packing material until all parts are examined.
If any part of the trimmer
instatl the battery pack into the trimmer
until the damaged
part is repaired
Edge Guide Wheels