Gigabyte GA-MA790GPT-UD3H User Manual page 43

Row Precharge Time
Options are: Auto (default), 5T~12T.
Minimum RAS Active Time
Options are: Auto (default), 15T~30T.
1T/2T Command Timing
Options are: Auto (default), 1T, 2T.
TwTr Command Delay
Options are: Auto (default), 4T~7T.
Trfc0 for DIMM1
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc2 for DIMM2
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc1 for DIMM3
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Trfc3 for DIMM4
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time
Options are: Auto (default), 5T~8T, 10T, 12T.
Precharge Time
Options are: Auto (default), 4T~7T.
Row Cycle Time
Options are: Auto (default), 11T~42T.
RAS to RAS Delay
Options are: Auto (default), 4T~7T.
CHA ProcOdt
Options are: Auto (default), 240 ohms, 120 ohms, 60 ohms.
CHA DQS drive strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
CHA Data drive strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
CHA MEMCLK drive strength
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
CHA Add/Cmd drive strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CHA CS/ODT drive strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CHA CKE drive strength
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CHB ProcOdt
Options are: Auto (default), 240 ohms, 120 ohms, 60 ohms.
- 43 - BIOS Setup