There is a cord lockfeature on the handle
to preventthe extensioncordfrom
detachingduring use. Plug the cord into
the unit,then secure the cord as shown.
After flat surfacesare covered with wax,
do sides of the car. Hold the polisheras
shown. Let the cordhang free. It is not
necessaryto use a criss-cross motionon
doors and fenders.
ALWAYS START AND STOP THE
POLISHER ON OR AGAINST THE CAR
Place the extension cord over your
shoulder and do flat surfaces first--hood,
trunk and roof. Cover areas quickly with
broad, sweeping strokes in a criss-cross
DO NOT press down on the polisher.
The machine's action, not pressure,
does the best job.
Remove the wax applicator bonnet and
use it to hand-polish all hard-to-reach
surfaces; under the bumpers, around the
door handles, etc.
Throw away the wax applicator bonnet
and put a clean terryclothbonneton the
Polish the wax in the same order it was
applied. Use long, sweeping strokes in a
criss-cross pattern. Do not press hard. Let
the polisher do the work.