Download Print this page

Craftsman 646.10659 Owner's Manual page 3

Double insulated buffer/polisher system
Hide thumbs

Advertisement

TOOL
USE AND CARE
• Store idle tools out of reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained
users.
• Maintain tools with care. Properly
maintained tools are less likely to bind
and are easier to control.
• Check for miselignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tool's operation.
If damaged,
have the
tool serviced before using. Many
accidents are caused by poorly
maintained tools.
• Use onlyaccessoriesthat are
recommendedby the manufacturerfor
your model.Accessoriesthat may be
suitablefor one tool may create a riskof
injurywhen used on another tool,
SERVICE
• Toolservice must be performedonly by
qualified repairpersonnel,Service or
maintenanceperformedby unqualified
personnelmay resultin a risk of injury.
• When servicinga tool, use onlyidentical
replacementparts. Followinstructions in
the maintenancesectionof this manual.
Use of unauthorizedparts or failure to
follow maintenanceinstructions may
create a riskof electricshockor injury.
Before you begin, make sure your car is
clean and dry. The work area should be
dry also. If necessary, remove road tar
with a general cleaner before polishing.
Also, remove excess grease spots, bug
stains, etc.
NOTE: The Wax & Polishing Solution
containers shown in the illustrations
are
representative. Yours may look different.
A
Place the blue wax applicator bonnet on
pad as shown. Make sure the elastic is
tucked down securely and evenly around
the underside of the pad.
B FOR PASTE WAX
Spread about a heaping teaspoonful of wax
evenly over the entire surface of the wax
applicator bonnet. Use a putty knife or any
flat object. DO NOT APPLY WAX DIRECTLY
TO CAR.
_
C FOR LIQUID WAX
Apply three swirls of liquid wax on the wax
applicator bonnet. DO NOT APPLY WAX
DIRECTLY TO CAR. This first application
should do about 1/4 of the cat. For the
second and third applications
of wax, use
half the quantity stated above, The bonnet
will not absorb as much when reloading.
D
The polisher is turned on and off by
squeezing and releasing the trigger
switch. The LOCK button on the trigger
switch can be used to lock the machine in
ON position while it is running. To lock,
depress the LOCK button as you release
the trigger switch. To release LOCK, press
the trigger switch.
LOCkbutton.
Trigger switch -
3

Advertisement

loading

  Related Manuals for Craftsman 646.10659