Craftsman 172.27696 Owner's Manual page 12

TO REMOVE AND EMPTY DUST BAG (See Fig. 6)
1. Unplug the sander.
L_ WARNING:
Failure to unplug the sander could result in accidental
starting causing possible serious personal injury.
lllllll llllll lllllll lllll i ill ill i i i i
2. Remove dust bag assembly from sander by firmly holding the adapter and pulling
straight out.
3, Remove dust bag from adapter (see Fig. 6).
4. Shake dust bag to empty.
5oPlace dust bag back onto the adapter.
6, Attach dust bag assembly back onto sander.
Fig 6
I
Dust Bag
Dust ?/_
Exhaus! Hole
ATTACHING THE VACUUM HOSE ADAPTER (See Fig. 7)
Your sander includes a vacuum hose adapter that easily attaches to the sander.
The adapter allows you to hook your sander up to your wet dry vac (sold separately).
1, Unplugthe sander..
L_ WAR NING:
Failure to unplug the sander could result in accidental starting
causing possible serious personal injury..
i
2, Remove dust bag assembly from the sander by firmly holding the adapter and
pulling it straight out.
3. Insert vacuum hose adapter into the dust exhaust hole.
4. Push in adapter until the raised edges on the top and bottom of the adapter snap
into the grooves in the dust exhaust hole.
5, Firmly attach the vacuum hose adapter to your vacuum hose.
6. Attach vacuum hose to vac.
Fig 7
Dust Exhaust Hole
_ Vacuum
Hose Adapler
12