Temperature Control Knob - Chery QQ6 Service Manual

Ventilation and A/C System

Temperature control knob

The temperature control knob is used to
control the temeprature of air which flows
out via the vent.
Blue position: cold air
Red position: heating
Blower knob
The blower knob is used to control the
66
speed of blower (4 positions in total). The
velocity of wind is adjusted by the blower.
To improve the comfortability, turn on the
blower during drviing.
Inner/Outer air circulation
control lever
It is applied to select the exterior fresh air
or interiro circulating air.
Outer circulation mode (
The exterior air enters into the interior of
vehicle.
It is applicable for the normal ventilation,
heating and cooling.
Inner circulation mode (
The interior air circulates within the
interior of vehicle. In the dusty
environment, or to avoid that the exterior
waste gas enters into the interior of vehicle,
and to rapidly cool or heat the interior air,
this mode applies..
!NOTICE:
The continuous
circulation mode will make the interior
sultry and the window glass frosting. So,
the inner circulation mode is in service
)
only for a short time.
)
use of the inner