Download Print this page

Jenn-Air JXT9130CDP User Manual page 5

30”/36" range hood
Hide thumbs Also See for JXT9130CDP:

Advertisement

Available languages

Available languages

LIGHTS
Replacing Light Bulbs
CAUTION:
DO NOT touch bulb until switched off and cooled. Touching hot
Make sure all power is turned off and
bulbs are not hot.
Remove by turning bulb counter-
clockwise.
If bulbs are difficult to remove due to pro-
longed use, firmly attach a glass suction cup
(readily available at most lighting stores)
approximately the diameter of the bulb and
turn counter clockwise. You may also use a
rubber or latex glove to get the same effect.
Replacement bulbs are available at specialty
lighting stores. Purchase type GU10 120V
50W halogen bulbs.
Or to order bulbs, please call our service
center:1-800-JENNAIR (1-800-536-6247)
MAINTENANCE
Light bulb becomes extremely hot when turned on.
bulbs could cause serious burns.
4

Advertisement

loading

This manual is also suitable for:

Jxt9136cdp