Setting The Home Temperature - Carrier TP-NHP Owner's Manual

OPERATING THE THERMOSTAT
Setting the home temperature
1. Open the door.
2. Press the home button located under the display on the o_------_o
left. You will see a triangle icon (V) above the home o_jo
button. This icon will always tell you whether you're in
the home, away or sleep setting, o o
3. You will see the heating and cooling temperatures that e_ °
were set at the factory. To use these, just close the door. o[___Io 4. To change the heating setting, press the mode button on
the left until you see the word heat on the screen on the o o
left.
5. Press the up or down button until you reach the desired
temperature setting. The arrow pointing to the home oil tle
button will disappear, o_ •
6. Press and hold the home button for about three seconds, o o
The home arrow will be displayed, indicating that the
thermostat has saved your settings.
7. To change the cooling temperature setting, press the
mode button repeatedly until you see the word cool on
the screen on the right.