Connecting The Acoustimass Module To The Lifestyle Media Center - Bose Acoustimass-20 Owner's Manual

Connecting the Acoustimass module to the Lifestyle s media center
Figure 13
Connecdng me speakers
your Lifestyle media center
Figure 14
Setting up a Zone 2 remote
control
® ©
FIX
,_ Note: To extend the length of the cables, use the supplied 50-feet extension cable (shown in
the dotted line above). This cable connects between the 30-foot audio input cable and the 3-
foot FIX adapter cable.
To connect the Acoustimass 5 or 20 powered speakers to your system (Figure 13), follow
these steps:
1. Using the supplied 30-foot audio input cable, insert the DIN connector into the
Acoustimass module, and the RCA plugs into the supplied 3-foot adapter cable labeled
FIX on the single-connector end.
2. Attach the end of the 3-foot FIX adapter cable to the ZONE 2 output jack on the rear of the
Lifestyle media center.
Setting
up the remote control
You need to set up a second remote control to operate the ZONE 2 output.
1. Remove the remote control batter}/cover and locate the miniature switches (Figure 14).
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those on your first
remote.
3. Make sure switches 5, 7, and 8 are up, and 6 and 9 are down.
Note: Refer to your Lifestyld _system owner's guide for more information on operating your
system in more than one room.
\ /
\
\
12 December 20, 2001 AM262838 00 Vpdf