Install Ink Cartridges - Epson Stylus Pro 4480 Specification Sheet

Set Up and Turn On the Printer
1
Connect the power cord to the
AC inlet on the back of the
printer. (Do not connect the
printer cable yet.)
2
Plug the other end of the power
cord into a properly grounded
electrical outlet.
3
Insert the paper tray into the slots at the
front of the printer.

Install Ink Cartridges

1
Press the power button to turn on the printer.
2
Press both ink compartment covers to open them.
3
Raise both ink levers.
4
Remove each ink cartridge from its package and gently shake
the cartridge.
The first time you install ink cartridges, the printer uses
Note:
some ink to charge the printing system, so print yields may be
lower with the first cartridges. Subsequent ink cartridges will last
for their full rated life.
5
Install the ink cartridges in the printer. Hold each
cartridge with the arrow pointing toward the printer,
then insert it into its slot. Make sure you insert each
cartridge in the correct slot.
AC inlet
Power button