Xerox Nuvera 100 EA Product Safety Data Sheet page 2

Product: Nuvera 100 EA Digital Production System
Nuvera 120 EA Digital Production System
Section V - Emission/Exposure Information
Light Source
Class 1 laser system for xerographic exposure.
There is no access to laser light during
operation/maintenance or service.
Electromagnetic Emissions
US
Canada
Audible Noise
Run
Standby
Impulse
Chemical Emission Testing per ECMA 328
Ozone – 0.02 mg/m
Concentration Based on Simulation Model:
Daily Copy Volume 57,600 impression / 8 hours
Room Size
Particulates – 0.025 mg/m
TVOC's – 0.009 mg/m
Section VI - Product Recycling and Disposal
Xerox operates a worldwide equipment takeback and reuse/recycle program. Contact your Xerox
sales representative (1-800-ASK-XEROX) to determine whether this Xerox product is part of the
program.
www.xerox.com/environment.
If you are managing the disposal of your Xerox product, please note that the product contains
lead, mercury and other materials whose disposal may be regulated due to environmental
considerations. The presence of lead and mercury is fully consistent with global regulations
applicable at the time that the product was placed on the market. For recycling and disposal
information, contact your local authorities. In the United States, you may also refer to the
Electronic Industries Alliance web site: www.eiae.org.
All measurements were made on products performing within established operating specifications and received
recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for
safety and emissions.
FCC: Class A
DOC: Class A
dBA: 64
dBA: 40
dBA: 70
3
3
47 m
3
3
For more information
www.xerox.com
FDA Accession No.
0320931-00
Bel(A): 8.1
Bel(A): 5.7
about Xerox
Reference "About Xerox"
PSDS No.: 0997
environmental programs, visit