Amana W10096991A Use And Care Manual page 6

CYCLE GUIDE --AUTOMATIC DRY CYCLES
Not all cycles and settings are available on all models.
Items todry: _ Dryness Level:- Temperature:- _ Cycle Details:
u u H
= = =
Jeans, heavy work clothes,
towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
More Dry/Very Dry
Energy Preferred
Less Dry
More Dry/Very Dry
Energy Preferred
Less Dry
More Dry/Very Dry
Energy Preferred
Less Dry
High
Medium
Low
Automatic cycles give the best drying in the
shortest time. Drying time varies based on fabric
type, load size, and dryness setting.
Select a drying temperature based on the fabrics
in your load. If you are unsure of the temperature
to select for a load, select the lower setting rather
than the higher setting.
NOTE: If loads do not seem as dry as you would like, select Very/More Dry next time you dry a similar load. If loads seem drier than
you like, select Less Dry next time you dry a similar load.
CYCLE GUIDE -- TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control.
_ _-- _ _ .
Items to dry: Cycle: Temperature: Cycle Details:
I
Large or heavy items such
as thick towels or robes
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
Heavy Duty/
Heavy Dry
Damp Dry
Tumble Press ®
Air Dry/No Heat
No Heat Fluff
=
Choose high to dry large or heavy loads. Any
Any
Any
N/A
Dries items to a damp level or for items that do not
require an entire drying cycle.
Use low to medium temperature to smooth out
wrinkles, such as those found in clothes packed
in a suitcase or in items wrinkled from being left in
the dryer too long.
No heat drying.
Setting the Drying Temperature
If your dryer has multiple heat settings:
[] A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
[] A Low to Medium temperature setting may be used for
drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and some
knits.
[] Use the Air Dry/No Heat or No Heat Fluff setting for foam,
rubber, plastic, or heat-sensitive fabrics.
[] Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
6