Table of Contents
Advertisement
(I
SETUP MENU
2. Using CHANNEL
(CH) Up/Down
go to the nearest
channel
ABOVE
the channel
you wish
to add.
NOTE:
AUX
channel
will not appear while using
CH. ADD/DEL.
CH. (Channel)
ADD/DEL
Purpose
Lets you add channels to and remove channels from the ac-
tive channels found when using the AUTO CH. SEARCH
option. In this way you can customize the channels that are
accessed through CHANNEL
(CH) Up/Down.
CH. ADD/DEL
is an optional feature. You do not have to
activate this feature in order to use your TV.
Before Using CH. ADD/DEL
Use the AUTO CH. SEARCH
feature, if not previously
used when you first installed the TV.
To Add a Channel to Scan Sequence
1. CH. ADD/DEL
display should be shown on the TV
if you followed
the "Basic
Menu Operation"
given
in the "On-Screen
Menus" section.
AUTO CH. SEARCH
- > CH. ADD/DEL
TUNING
BAND
AUTO
FINE TUNE
CLOCK SET
CAPTIONS
CH. ADD/DEL
CH 2
ADDED
PRESS ADJUST
KEY TO CHANGE
Selecting Ch. Add/Del
Ch. Add/Del Display
3. Press SELECT
to go down to the channel you wish
to add.
4. Add
channel
by
pressing
ADJUST
(ADJ)
Left/Right
until the display shows ADDED.
5. Press ENTER
(ENT) to return to normal TV viewing.
To Delete a Channel from Scan Sequence
1. CH. ADD/DEL
display should
be shown on the TV
if you followed
the "Basic
Menu Operation"
given
in the "On-Screen
Menus"
section.
2. Using CHANNEL
(CH) Up/Down
go to the channel
you wish to remove.
NOTE:
AUX
channel
cannot
be removed.
3. Remove
channel
by pressing
ADJUST
(ADJ)
Left/Right
until the display
shows DELETED.
4. Press ENTER
(ENT) to return to normal TV viewing.
When Some Channels Can Not Be Tuned
If you have some difficulty tuning some channels, you may
have to manually set the TUNING
BAND option. If you
have the correct band, but are still having difficulty finding
a channel you know to be active, set the AUTO
FINE
TUNE to SEARCH.
TUNING
BAND
Purpose
Allows for setting the TV tuner to match your antenna or
cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
Before Using TUNING BAND
Connect and turn ON all external equipment, such as cable-
TV decoder, VCR, etc. Use AUTO
CH. SEARCH
if not
previously used.
NOTE: TUNING
BAND is not displayed while AUX chan-
nel is being used.
To Use TUNING BAND
1. TUNING
BAND
display should be shown on the TV
if you followed
the "Basic
Menu
Operation"
given
in the "On-Screen
Menus"
section.
AUTO CH. SEARCH
CH. ADD/DEL
-- > TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
Selecting
Tuning
Band
TUNING BAND
BROADCAST
PRESS ADJUST
KEY TO CHANGE
J
Tuning Band Display
2. Press
ADJUST
(ADJ)
Left/Right
to select
the
desired
tuning band, as follows:
-
*
BROADCAST
is used for standard
"over-the-air"
broadcasts.
•
Cable - CATV is used for most standard cable-TV
(CATV) systems.
*
Cable - HRC is used for cable-TV systems that use
HRC (Harmonically
Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental
Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast
and cable
tuning bands are shown below:
BROADCAST Band
VHF 2 to 13
UHF
14 to 69*
*
Channels above 69 are not selectable.
CATV, HRC and ICC Bands
1 to 125"*
** Channels above 125 may not be selectable.
When Some Channels Are Not Clear
If some channels are not dear, change the AUTO FINE TUNE.
You may have to try different TUNING BAND and AUTO
•FINE TUNE settings until you get a dear picture, channel-to-
channel. Refer to the AUTO FINE TUNE option for details.
257_A
9 -- 2
Advertisement
Table of Contents
