Zenith Z42P3 Installation And Operation Manual page 54

Reference
09. Color (Command2:i)
I_ To adjust the screen color.
You can also adjust color in the Video menu.
Transmission
I[k][i][ ][Set IU][ ][Uata][Cr] i
Data Min:O-Max:64
® Refer to 'Real data mapping'. See page 53.
Acknowledgement
i[i][ ][Set IU][ ][OK][Uata][x] i
10. Tint (Command2:j)
I_ To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission
I[k][j][ ][Set IU][ ][Uata][Cr] i
Data Red:O-Green:64
® Refer to 'Real data mapping'. See page 53.
Acknowledgement
i[ j] [ ][Set ID][ ][OK][Data][x] I
11. Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the Video menu.
Transmission
[[k][k][ ][Set ID][ ][Data][Cr] I
Data Min: 0 _ Max: 64
® Refer to 'Real data mapping'. See page 53.
Acknowledgement
[[k][ ][Set ID][ ][OK][Data][x] I
12. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off.
Transmission
![k][I][ ][Set ID][ ][Data][Cr] j
Data O: OSD off 1: OSD on
Acknowledgement
I[I][ ][Set IU][ ][OK][Uata][x] ]
54
13. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel controls on
the set.
Transmission
I[k][m][ ][Set IU][ ][Uata][Cr] I
Data O: Lock off 1 : Lock on
Acknowledgement
I[m][ ][Set ID][ ][OK][Data][x] i
14. Treble (Command2:r)
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission
I[k][r][ ][Set ID][ ][Data][Cr] i
Data Min: 0 _ Max: 64
® Refer to 'Real data mapping'. See page 53.
Acknowledqement
[[r][ ][Set ID][ ][OK][Data][x] ]
15. Bass (Command2:s)
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission
I[k][s][ ][Set ID][ ][Data][Cr] I
Data Min: 0 _ Max: 64
® Refer to 'Real data mapping'. See page 53.
Acknowledgement
[[s][ ][Set ID][ ][OK][Data][x] ]
16. Balance (Command2:t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission
[[k][t][ ][Set ID][ ][Data][Cr] ]
Data Min: 0 _ Max: 64
® Refer to 'Real data mapping'. See page 53.
Acknowledgement
[[t][ ][Set ID][ ][OK][Data][x] ]
17. Color Temperature (Command2:u)
To adjust color temperature.
You can also adjust color temperature in the Video
menu.
Transmisslon
[[k][u][ ][Set ID][ ][Data][Cr] ]
Data O: Medium 1: Cool 2: Warm 3: User
Acknowledgement
[[u][ ][Set IU][ ][OK][Uata][x] ]