Zenith Z42P3 Installation And Operation Manual page 21

I I
Installation
This TV can receive Digital Over-the=air/Cable signals without an external digital set=top box. However, if
you do receive Digital signals from a digital set=top box or other digital external device, refer to the figure
as shown below.
...._--m ...........................
|
® ®
Digital Set-top Box
@ Connect the HDMI output of the digital set-top
box to the HDMI iN I(DVl) or 2 jack on the set.
Select HDMI1 DVI or HDMI2 input source with
using the iNPUT button on the remote control,
Turn on the digital set-top box (Refer to the
owner's manual for the digital set-top box.)
• TV can receive the video and audio signal simultaneously using a HDMI cable.
• If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top box will
be automatically set to 1280x720p.
If the digital set-top box does not support Auto HDMI, you need to set the output resolution appro-
priately. To get the best picture quality, adjust the output resolution of the digital set-top box to
1280x720p.
/
owner s manual for the digital set.top box:)
, Select Component 1 input source w th using the
:: iNPUT button 0n the rem0te Control.
..... i If ConneCted to COMPONENT IN 2 Select
i Component 2 input Source:
t
I
%77ETTFTETTZ"TT77ETT77ETTZ"T77"ETTFZE774
21
I
I