Zenith Z42P3 Installation And Operation Manual page 14

BaSiC Connection
1
Place the set with the screen facing down on
a cushion or soft cloth as shown.
Before unfolding the stand, please make sure
two locks (A) on the bottom of the stand push
outward.
(A)
2
Pull the stand out as shown.
After unfolding the stand, please insert and
tighten the screws (provided as parts of the
product) in the holes (B) on the bottom of the
stand.
(a)
* Image shown here may be slightly different from
your set.
When closing the stand for storage
- First remove the screws inthe holes (B) on the bottom
of the stand. And then pull two Hooks (D) of the stand
/ (C) bottom and fold the stand into the back of the set.
- After folding, push the two Locks (A) of the stand
When connecting cables to the set, Do not
disengage the lock (C).
This may cause the set to fall, causing serious
bodily injury and serious damage to the set.
bottom outward.
(D)
(B)
14