Sanyo WXU30 - PLC - LCD Projector Owner's Manual page 73

Item Description
Key lock ..................... Sets the prohibition of controls either Projector or
Remote control.
Fan .............................. Sets the cooling options after turning off.
L1 Normal cooling
L2 Silent cooling
Fan control ..............Sets the fan control speed.
Status .................Indicates the current fan mode.
Item Description
Lamp counter ......... Displays the lamp use time (Corresponding value) .
Reset the time after the lamp is replaced.
Lamp counter resetting
1. Select a Lamp radio button and then click
OK
2. Click button to execute the reset.
Filter counter ........... Displays the filter use time. Reset the time after filter
clean-up.
Filter warning .......... Sets the time to indicate the filter warning message on
the screen.
Item Description
Factory default ................ Sets all of the projector control items to the factory
default setting except the following items.
Lamp Corres. Value, PJ time, Filter time, PIN code lock
and Logo PIN code lock.
P-TIMER .....................Switches the P-TIMER display.
ON .......... Starts P-TIMER indication
STOP ...... Stops P-TIMER counting
OFF ........ Stops P-TIMER indication
Setting up the projector
Reset
button.
73