How To Use The Network Communication - Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Network set-up and operation
Hide thumbs Also See for WXU30 - PLC - LCD Projector:
Table of Contents

Advertisement

Chapter 8 Network capture functions

How to use the Network communication

Start the communication
1
Display an image on the computer screen.
2
Start Network Capture 4. The application window appears and the projectors in the network are listed.
3
Select the projector(s) and click Start Communication button. The application window disappears and
the capture editing window with a captured image appears on the computer screen. The projector
displays captured image on the screen.
If an error message appears, check the item "Parameter set up". (
Join the communication
1
Start Network Capture 4. The application window appears and lists the projector in the network.
2
Select a projector whose status on the projector list indicates "Communication starting", and click Start
communication button. The application window disappears.
3
Click Start editing menu on the popup menu appeared by clicking the Network Capture 4 icon on the
task bar. The capture editing window with a captured image appears on the computer screen.
Exit from the communication
Click "
:End editing" button on the standard tool bar. The capture editing window will be closed.
This command is available with the Sub PC only.
When "End editing" with the authority provided is executed, the authority will be released.
End the communication
Click "
:Terminate Communication" button on the standard tool bar.
The capture editing window will be closed.
This command is available with the Main PC only.
The communication cannot be ended while other PC has the authority. To end communication forcibly,
click the Capture 4 icon on the task bar and select "Shut down" on the popup menu.
How to acquire and release the editing authority
To edit the capture image, each computer needs to acquire the authority respectively. To acquire the
authority, click "
capture editing window indicates the authority status by changing the frame color depending on the
current authority mode as follows.
having an authority
98
(only for Sub PC)
: Authority" button on the standard tool bar and then edit the capture image. The
Red
other computer having
p.88)
+
(only for Sub PC)
an authority
Blue
ready to acquire an authority
Green

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wxu30

Table of Contents