Sanyo WXU30 - PLC - LCD Projector Owner's Manual page 67

System
This function is to select the system of signal input to the projector. The available system mode are listed
on the pull-down menu button according to the input signal. Select a system and then click Set button.
✐ If the modes (Mode1 to Mode5) stored in the item "PC Adjustment" (+ p.70) are available, they are also
listed together with the above mode.
Available selection at the RGB(PC analog) input
Item Description
XGA1 .......................... It automatically switches to the proper computer sys-
tem of the input signal.
* The computer system modes (VGA, SVGA, XGA. SXGA,
UXGA, WXGA...) which meet the input signal listed.
Available selection at the RGB(PC digital) input
Item Description
D-XGA ........................ It automatically switches to the proper computer sys-
tem of the input signal.
* The computer system modes (D-VGA, D-SVGA, D-XGA.
D-SXGA1...) which meet the input signal listed.
Available selection at the Video/S-video/Scart input
Item Description
AUTO .......................... It automatically switches to the proper color system of
the input signal.
* The selectable color systems are PAL, SECAM, NTSC,
NTSC4.43, PAL-M and PAL-N.
* AUTO is fixed at the Scart input.
Available selection at the RGB(AV HDCP) input
Item Description
D-480p ....................... It automatically switches to the proper scanning system
of the input signal.
* The selectable scanning systems are D-480p, D-575p,
D-720p, D-1035i and D-1080i.
Available selection at the Component input
Item Description
AUTO .......................... It automatically switches to the proper scanning system
of the input signal.
* The selectable scanning systems are 480i, 575i, 480p,
575p, 720p, 1035i and 1080i.
Controls
67