Chapter 2
Setting Lock
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Call your administrator
or Brother Customer Service.
While Setting Lock is On, you cannot access
the machine settings.
Machine settings cannot be changed through
the Remote Setup utility while Setting Lock
is On.
12
Setting up the administrator
2
password
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down, or press a or b to
display Security.
f
Press Security.
g
Press Setting Lock.
h
Enter a four-digit number for the new
password using the keyboard on the
Touchscreen.
Press OK.
i
Re-enter the new password when the
Touchscreen shows Verify:.
Press OK.
j
Press
.
.
2