Brother MFC-9130CW Basic User's Manual page 122

Error Message
1
Replace Toner
1
The Touchscreen
shows the toner
cartridge color that
you must replace.
BK=Black, C=Cyan,
M=Magenta, Y=Yellow
Replace WT Box
Scan Unable
Scan Unable XX
Short paper
Size Error
2-sided
Size mismatch
Small paper
Toner Error
108
Cause
The toner cartridge is at the
end of its life. The machine will
stop all print operations.
While memory is available,
faxes will be stored in the
memory.
It is time to replace the waste
toner box.
Document is too long for
2-sided scanning.
The machine has a mechanical
problem.
The length of the paper in the
tray is too short for the machine
to deliver it to the Face down
output tray.
The paper size defined in the
printer driver and the
Touchscreen menu is not
available for automatic 2-sided
printing.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
The paper in the tray is not the
correct size.
The paper size specified in the
printer driver is too small for the
machine to deliver it to the
Face-down output tray.
One or more toner cartridges
are not installed correctly.
Action
Replace the toner cartridge for the color
indicated on the Touchscreen (see Replacing
the toner cartridges on page 75).
Replace the waste toner box (see Replacing
the waste toner box on page 95).
Press . Use the appropriate size of paper
for 2-sided scanning (see Print media
on page 198).

Press and hold down
machine off, and then turn it on again (see
Transferring your faxes or Fax Journal
report on page 110).

If the problem continues, call Brother
Customer Service.
Open the back cover (face-up output tray) to let
the printed page exit onto the face up output
tray. Remove the printed pages and then press
Start.
Press . Choose a paper size that is
supported by 2-sided printing.
The paper size you can use for automatic
2-sided printing is Letter, Legal or Folio.
Load the correct size of paper in the tray and
set the size of paper for the tray (see Paper
Size on page 27).
The paper size you can use for automatic
2-sided printing is Letter, Legal or Folio.
Load the correct size of paper in the tray and
set the size of paper to the tray (see Paper Size
on page 27).
Open the back cover (back output tray) to let
the printed paper out on the back output tray
and then press Start.
Pull out the drum units. Remove all of the toner
cartridges, and then put them back into the
drum units.
to turn the