Integrated Peripherals - Gigabyte GA-GC330UD User Manual

2-5

Integrated Peripherals


On-Chip Primary PCI IDE
Enables or disables the first integrated IDE controller. (Default: Enabled)
On-Chip SATA Mode
Configures the integrated SATA controller.
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
This value is dependent on the On-Chip SATA Mode setting.
SATA Port0 Set to
This value is dependent on the On-Chip SATA Mode setting.
SATA Port1 Set to
This value is dependent on the On-Chip SATA Mode setting.
Disables the integrated SATA controller.
Lets BIOS set SATA devices to Combined or Enhanced mode.
If your onboard SATA controller is automatically configured to Combined
mode, you can manually re-configure it to Enhanced mode as needed.
(Default)
Sets all SATA devices to operate in PATA mode. Combined allows a
maximum of 4 ATA devices to be used simultaneously: two PATA devices
plus two SATA devices.
Sets all SATA devices to operate in SATA mode.
Sets all SATA devices to operate in PATA mode and disables the integrated
IDE controller.
- 31 -

BIOS Setup