Table of Contents
Advertisement
Table 15. Removal steps of battery pack (continued)
1090 DIMM
For access, perform the following steps in order:
•
"1000 Disabling the battery pack in UEFI BIOS" on page 48
• Remove the "1010 Hard disk drive or solid state drive assembly" on page 48.
• Remove the "1020 Keyboard" on page 50.
Table 16. Removal steps of DIMM
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM in firmly, and pivot it until it
snaps into place. Make sure that it is firmly fixed in the slot and does not move easily.
.
Chapter 8
Removing and replacing a FRU
57
Advertisement
Table of Contents
