Advertisement
To
F LAV
ACK
2
Be sure the PREPARATIONS
on page 1 have been completed
before proceeding to step 1 below.
AT THE TV
"rum the "IV ON and
select its VCR
channel.
The TV's VCR Channel is
either channel 3 or 4.
AT THE VCR
Insert a cassette.
The Power will come ON
automatically.
If the Record Tab (page 18) is
removed, playback will start
automatically. (In this case
skip step 3.)
if a cassette is afteady in the
VCR, just press the POWER
Button ON.
START PLAYBACK
Press the PLAY
Button.
The VCR Indicator will light.
This automatically
sets the
VCR mode
(see below).
For Special Effects see
page 9.
STOP PLAYBACK
Press the STOP
Button.
•
Press the EJECT Button to
remove
the cassette.
PLAY
BuTroN
POWER
ON;
STOP/EJECT
STOP
SELECT
THE
BUTTON
VCR CHANNEL
BuTroN
USING
THE
° SELECTOR
GD QD CD
Q27 CD CD
J
J
J
J
CJ_
_ ZJ
VCRKV
SELECTOR
NUMERIC
KEYS
CHANNEL
UP/DOWN
KEYS
After you have a cable system or antenna connected
to your VCR and the "TO GET STARTED"
connections
on page 1 are
complete,
you can begin to watch
TV broadcast
channels
using your VCR or TV tuner.
ANTENNA
(or CABLE)
Remote
Control
VCR/'I'V Selector
L
VCR Indicator
"VCR"
TO SELECT
CHANNELS
AT THE VCR FOR VIEWING
OR RECORDING
It is necessary to place the VCR in the "VCR" mode. Be sure that the TV is tuned to the same channel which was selected
for the VCR channel (CH3 or 4) above,
1) WHEN
YOU TURN
ON YOUR VCR
The "VCR" mode
is automatically
selected, just turn the TV power ON and select the VCR CHANNEL,
2) WHEN
THE VCR POWER
IS ALREADY
ON
The VCR Indicator should show on the front panel,
If the VCR Indicator is not showing, select the "VCR" mode by pressing the VCR/TV
SELECTOR
Button once,
Select channels
using the VCR REMOTE
CONTROL
CHANNEL
UP/DOWN
Keys or the NUMERIC
Keys.
TO SELECT
CHANNELS
AT THE TV FOR VIEWING
In "TV"
mode no "VCR"
indicator shows on the front panel.
I) WHEN
THE VCR IS TURNED
OFF
The "TV" mode is automatically
selected,
just turn the TV power ON
2) WHEN
THE VCR POWER
IS ALREADY
ON
If the VCR Indicator
is showing and the TV is already
ON select the "TV" mode
by pressing
the VCR/TV
SELECTOR
Button
once. The VCR Indicator
should
NOT show on the front panel
Select channels
using the TV channel
controls.
Advertisement
