Advertisement
Settings
for Recording
and TV Viewing
1. Set the VCR channel selector to the output channel of Converter
#1.
2. Select the channel to be recorded on Converter
#1.
To view the channel
being recorded:
• Set VCR/'rv
selector to "VCR".
• Set the A/B Switch to position A.
• Set the TV channel selector to the VCR output channel (channel 3 or 4).
NOTE:
• These settings are also used to view playback of a tape.
• Converter
Boxes, Splitters and Cables shown are not supplied.
To view a different
channel:
• Set the A/B Switch to position B.
• Set the TV channel selector to the output channel
of Converter
#2.
• Select the channel
to be viewed on converler
#2.
[6] Tv Auo,oN,oEO
CO..ECT,O.S
If your TV has AUDIO IN and VIDEO IN terminals,
you can connect the AUDIO OUT and VIDEO OUT connectors
on your VCR to
these terminals on your TV to receive a higher quality picture and sound.
VHF Antenna
UHF Antenna
UHF/VHF
Band
VHF IN
_
VIDEO
IN
Serrate,
tV
Y
_
UHF IN
_
\
OUT TO "
AUDIO
iN
TV Terminal
AUDIO
OUT
(not supplied)
S;_
IN FROM
ANT.
Terminal
VIDEO
OUT
NOTE:
• To use your TV as a VCR monitor,
set the VIDEOFrV
selector
on the TV (Monitor/Receiver)
to "VIDEO".
//
J
(two
lines for '
It you connect
the VCR to a component
stereo audio system,
you can view the VCR picture on TV with sound from the audio systel
AUDIO
OUT
OUTPUTS
two lines
for )
AMPLIFIER
Stereo/Hi-Fi
Advertisement
