Advertisement
[4]
tAuterNAte cABLE cOnnEcT,ON
WITH A (VCR TO TV) CONVERTERIDESCRAMBLER
BOX
If your cable system uses a converter
box, you may use this connection
instead of the basic cable connection
shown on the prewous
page.
Consult
your local cable company
first, if necessary.
IN FROM
ANT.
OUT TO TV
CATV
Input
Cable
TV
Converter
Box
With this connection
you can 1) program
unattended
recording
of more than one unscrambled
channel
2) view one channel
while
recording
another
NOTE:
• Use the VCR CHANNEL
UP!DOWN
Keys to select
a channel
to be recorded
• You cannot
record scrambled
channels
with this connection.
To Record
One_Channe!
while
Vjwing
Another
1. Select the channel
to be recorded
with the VCR CHANNEL
UP/DOWN
Keys
2. On the VCR set the VCR/TV
selector
to "TV"
3. Set the channel
selector
on the TV to the output
channel
of the Converter
Box
4. Select the channel
to be viewed
on the Converter
Box.
To Play Back a Tape
1. Set the VCR/TV
selector
to "VCR".
2
Set the TV channel
selector
to the output
channel
of the Converter
Box
3. Set the Converter
Box channel
selector
to the VCR output
channel
(channel
3 or 4).
[5]
[ALTERNATE CABLE CONNECT,ON
[]
WITH TWO CONVERTER/DESCRAMBLER
BOXES
If you want to record and view combinations
of scrambled
and unscrambled
channels
you will need additional
equipment
A typical
connection
using two converter
boxes,
an AJB Switch,
and a 2-way Splitter is shown
here.
2-Way
Splitter
OUT 1
CATV
Input
Cable
"IV
Converter
Box #1
IN FROM
ANT
OUT
TO TV
/
.
/
,,
A/B Switch
Advertisement
