Advertisement
9
HELPFUL
HINTS
(CONTINUED)
G
NOTES
ON OPERATIONS
TO GET STARTED
• With cable connections,
numbers selected to receive specific channels may differ from those for antenna connections.
Refer
to the separate
Basic Guide for VCR Connections
(or your cable service
information).
• If the reception
on all VHF channels
is unsatisfactory
you may need to re-tune
your TV set.
CLOCK
ADJUSTMENT
• Enter the first digit to set the month within
30 seconds of the appearance
of the clock set guide. Otherwise,
the program
you were watching will return to the screen.
If this happens, press the PROG/CLOCK
Button and start again.
• The letters for day of the week will automatically appear when you have entered both digits for the year.
• It the day digit entered does not match the calendar, it will advance to the first day of the next month
(for example,
"FEB 29 89" will advance
to "MAR
01 89").
• If you press the PROG/CLOCK
Button while the clock set guide "- .......
:--" appears, the TV screen will return to the program
you were watching.
CHANNEL
MEMORY
--
TV RAND
SELECTED CHANNEL INDICATION
02 -- 13
14 -- 69
CHANNEL
CHART
CHANNEL BAND DESIGNATIONS
CHANNEL RECEIVED OFF THE AIR
VHF
2 - 13
UHF
14 - 69
--
CATV
BAND
SELECTED
CHANNEL
INDICATION
02-
13
14 - 36
37 -- 64
95 - 99
0t
65 - 94
CHANNEL
BAND DESIGNATIONS
BROADCAST
VHF
CATV MID/SUPER
BANDS
CATV HYPER BAND
CATV LOW BAND
SPECIAL CATV CHANNEL
ULTRA BAND
CHANNEL
RECEIVED
OFF THE AIR
2-13
A-W
AA - EEE
A-5 - A-1
5A (between 4 and 5)
65 - 94
SPECIAL
EFFECTS
PLAYBACK
• During
search
playback, horizontal
noise bars will appear on the TV screen.
• After the VCR is in the pause or slow mode
for 5 minutes
it will stop automatically
for tape and video head protection.
• Special
effects
playback
can be activated
during
playback
of the tapes
recorded
in SP or SLP speed. Tapes
recorded
in
LP mode
can also be viewed
in special
effects playback,
but the picture
may be completely
snowy.
TO RECORD
• With manual recordings, if the tape end is reached during recording, the VCR automatically
rewinds and ejects the tape and
then shuts itself OFF.
• It is possible to change the Tape Speed Selection
while you are actualty recording but there will be a momentary
distortion
when the tape is played back over the point where the tape speed change
occurred.
• After the VCR has been in pause for 5 minutes
it wit] stop automatically
for tape and video head protection.
ONE TOUCH
RECORDING
• During
a One Touch
Recording,
press the OTR Button once to see an overlay
with the remaining
recording time.
• If the record
tab is missing on the cassette,
it will be ejected
when you press the OTR or STANDBY
Button.
• Once the VCR has been programmed
for a Standby
OTR, you witl be unable
to program
additional
timer
recordings.
You
will note when accessing
the program mode, "STANDBY
SET'* will appear at the bottom of the numbered
programs indicating
a Standby
OTR has been programmed.
TIMER RECORDING
• Timer
Recording
may not be performed
or continued
if a power interruption
of more than
about 1 minute occurs
before or
during
Timer
Recording,
even if power resumes thereafter
• If the start times of 2 preset
programs
overlap,
the preset time of the lower numbered
program will have priority.
RE-RECORDING
• Audio/Video
input connections
take priority over Antenna signais.
Remember
to remove the A/V inputs to resume TV reception/
recording
capability.
Advertisement
