Programming The Universal Remote Control - Panasonic PV-M2044 Operating Instructions Manual

Programming The Universal Remote Control
POWER
O MULTI
CD
ACTION
0
MUTE R-TUNE W/VIDEO
CD CD
® ® ®
® ® ®
® ® ®
RECALL
CD ® r-_
VCR VCR
POWER RECORD CHANNEL
REW PLAY FF
r-_-i F-_-I r--_-I
TV/VCR STOP PAUSE
r---q F--_ r----1
VCR
Preferred Procedure - Code Known
Programming Universal Remote Using In-
fra-Red Access Codes for VCRs
• Determine brand of VCR.
• Identify code(s) associated with the brand in the
infra-red code index for VCRs (located in this
manual).
Procedure
1. Press and hold VCR POWER button down on
Universal Remote.
2. Enter two digit code using keyboard "0 through 9"
buttons. The Universal Remote is now pro-
grammed.
NOTE: Some brands have multiple codes. Repeat
procedure using each code listed until VCR
responds correctly.
Alternate Procedure - Code Unknown
Programming Universal Remote Using the
"Sequence Method" for VCRs
• Confirm VCR is plugged in and operating properly,
then turn OFF.
Procedure
1. Press and hold the VCR POWER button down on
Universal Remote.
2. Press VOL RIGHT button repeatedly. Checkforthe
VCR to turn ON after each press. Stop pressing the
button when the VCR turns ON. The proper infra-
red code has now been accessed.
NOTE:
1. It may take several attempts before the correct code
is found.
2. The VOL LEFT button can be used to return to a
code that was accidently passed by.
3. Some Remote Controls may have unique operating
functions for some buttons. For Example: The
POWER button may only turn the VCR OFF as
opposed to both ON and OFF. It will then be
necessary to modify the procedure. Turn the VCR
ON and repeatedly press the VOL RIGHT button
until the VCR turns OFF.
Remote Control
NUll-: I he Universal Remote Control Memory is limited. Some models of VCRs may not operate. The Universal Remote
Control is not designed to control all features that are available in all models.
- 28 -