Front-Mounted An In Terminals - Panasonic Omnivision VHS PV-M2046 Operating Instructions Manual

Copying Your Tapes (Dubbing)
Connections you'll need to make.
Playing (Source) VCR
Video In_)
Recording (Editing)
Combination VCR
In
Insert a pre-recorded tape
into the Playing (source) VCR.
l
Insert a blank tape with record
tab into the Recording (editing)
Combination VCR.
l
_3_ Select "LINE" as the input on the
Recording Combination VCR.
• If you are using this Combination VCR as
the Recording unit, see "Selecting the Input
Mode" section on page 15.
Push PLAY on the playing VCR.
Then, push PAUSE when the
tape reaches the point you want
to start copying.
Push REC and PLAY at the same
time on the recording Combination
VCR. ]hen, push PAUSE on the
remote immediately.
f
I aution:
Unauthorized exchanging and/
or copying of copyrighted
recordings may be copyright
infringement.
J
Push PAUSE on both units (at the
same time), to begin copying.
Edit Out Unwanted Parts of the original recording by using the
PAUSE button (on the Recording unit) while copying is in progress.
_ hen, push STOP on both units to
stop copying.
23